|Ribbon and Flat Products|
supplies three basic types of flat conductors: ribbon (flat wire), strip, and foil or
sheet. All three products are produced in a series of rolling processes, and are supplied
with round, or sharp-edge constructions.
RIBBON - Normally produced from round wire in a singular multiple pass rolling process, ribbon products range in size from thicknesses as small as .0005", and widths as large as .100". Thickness tolerances are as tight as +/- .00015", and width tolerances are as tight as +/-.0005". Ribbon products usually are supplied with round edges, on spools that are paper sectioned to enhance despooling
STRIP - Generally speaking, strip products range from thicknesses of .005", with widths from .125 to 2 inches. Radial or sharp edges are available, with material packaged in coils or on spools.
FOIL or SHEET - Produced after rolling, by shearing or slitting process, foil or sheet is supplied in widths from 2 - 12 inches. Thicknesses can range from .001" to .020". The "slit" edge is sharp and may require " deburring" for certain applications.
|Precious metal rolling mill custom-built and specifically designed for fabrication of gold, silver, platinum, and palladium ribbon. Dimensional tolerances as tight as .00005".||Reusch Model# 154 Rolling mil provides state-of-the-art capabilities for the production of tight tolerance flat conductors. Sizes range from .0005" thickness to 2" widths with tolerances as close as +/-.00015".|
|Click here for Information on Plated Ribbon Products|