|Specialty Aluminum Products|
High Purity Aluminum
High purity aluminum wires and ribbons are produced in a broad range of sizes under tightly controlled purity refining standards. Aluminum 1199 (99.99% min. purity), as well as 99.999% and 99.9999% aluminum are widely used in specialty electronic and chemical applications. Applications include vacuum deposition of thin films and coatings used in the manufacturing of electronic devices, integrated circuits and optical products. Aluminum 1199 has excellent corrosion resistance, high thermal and electrical conductivity, low mechanical properties and good workability.
Aluminum Alloy 5056
Commonly referred to as Alclad 5056, this alloy possesses moderate to high strength, is non-heat-treatable and has good welding characteristics. Care must be taken when working above 66°C to avoid stress corrosion. 5056 aluminum has good corrosion resistance in marine atmospheres largely due to its high purity aluminum outer cladding which usually measures 20% total thickness per side. Magnesium is the major alloying element. Applications include cable sheathing and wire screens.
Aluminum Alloy 6061
Alclad 6061 is one of the most versatile of the heat-treatable aluminum alloys. 6061 aluminum's combination of high strength, corrosion resistance and good formability make it attractive for use in a wide variety of mechanical applications. Silicon and magnesium are alloyed in approximate proportion forming magnesium silicide making 6061 heat-treatable. High purity aluminum cladding averages 5% of the thickness per side.
Properties of Aluminum and Aluminum Alloys
|Alloy||Chemical Composition (%)||Ultimate Tensile Strength (psi)||Electrical Conductivity IACS ( 20°C )||Electrical Resistivity (ohms/cmf)||Density (lbs/cubic inch)||Specific Gravity||Coefficient of Thermal Expansion x 10¯6 (20-100°C)||Approx. Melting Point ( 0°C)|
|1100||.12 Cu, 99 Al min.||13,000||59||18||.098||2.71||23.6||645|
|1350 (EC)||99.5 Al min.||13,000||61.8||17||.098||2.7||23.8||648|
|1199||99.996 Al min.||6,800||64.9||15||.0975||2.7||23.6||660|
|.12 Cr,||Al bal.|
|6061||.6 Si,||.28 Cu,||17,000||47||22||.098||2.7||23.6||617|
|1 Mg,||.2 Cr,|
|Mechanical and electrical values based on "O" soft temper.|
|Click here for data on Round EC Aluminum|
|Click here to return to Other Products page|